Description
Mesa Tactical 93000 SureShell 12-Shell Aluminum Carrier and Rail for Kel-Tec KSG – 6 Shells on each side
Click on this button to buy the Mesa Tactical 93000 SureShell 12-Shell Aluminum Carrier and Rail for Kel-Tec KSG on Amazon.com
Shotgun and other accessories shown in the photo are NOT INCLUDED.
SureShell Aluminum Carrier/Rail For Kel-Tec KSG Shotgun
The SureShell carrier system for the Kel-Tec KSG comprises a replacement anodized aluminum Picatinny optics rail which supports one or two machined shell carrier yokes. Small aluminum flanges on either side of the main rail can accept additional lengths of Picatinny rail to support weapon lights or targeting lasers (rail not included). A pair of unique steel recoil blocks featuring angled set screws ensure the rail assembly is securely mounted to the shotgun. SureShell carriers for the Kel-Tec KSG feature four- or six-shell yokes, on the left side or right side or both sides. A replacement Picatinny rail without SureShell yokes is also available.
SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed. Four and six shell configurations and multiple rail lengths available. This arrangement is designed to provide a robust and secure mounting method for the loaded SureShell carrier, even under heavy recoil.
Aluminum tabs on each side of the SureShell Carrier and Rail for the Kel-Tec KSG can accept lengths of Picatinny accessory rail (available separately) for the mounting of weapon lights and lasers. The KSG’s factory rail is attached to two mount pillars, front and back, with an M4 metric bolt at each end. The SureShell Carrier and Rail for the Kel-Tec KSG mounting system is slightly different. Once the factory rail is removed, a steel recoil block is installed
on each of the mount pillars. In addition to a hole for a replacement M2 bolt, each recoil block also features a threaded hole at a 45° angle that accepts a set screw that is tightened into the mounting pillar. The aluminum Sureshell and rail assembly is then fastened to the recoil blocks with four screws.
